200 West Second Street,
 Essington, PA 19029
610-521-2937
800-942-5880
FAX 610-521-1896
info@adamsfire.com
Respiratory Protection & Emergency Response PPE

Equipment
Service
Training

Draeger Multi-PID2

The Dräger Multi-PID 2 is the next generation of reliable photoionization detection for volatile organic compounds (VOCs). Its innovative PID-technology combines high sensitivity and robustness with suitability for various applications like soil, water or jar headspace screening, leak detection and confined space measurements.  Equipped with a standard 10.6 eV UVlamp the Draeger Multi-PID 2 covers a measuring range from 0 to 2,000 ppm.  An optional dilution probe extends the measuring range up to 20,000 ppm.  The built-in gas library holds up to 70 substances.  Another 60 substances are identified and can be substituted in the library.  For additional, customer specific compounds the response factor can be quantified by the Draeger own application laboratory.

 

Draeger X-am 7000 w/ PID

Draeger Safety is pleased to announce the availability of the PID (Photo Ionization Detector) for the X-am 7000 Multi-Gas Monitor.  This “smart” plug-and-play sensor is intended for use in confined space entry and area monitoring applications.  The PID Sensor can be used in the X-am 7000 in sample draw or diffusion configurations.  This sensor employs a 10.6ev lamp to monitor a wide range of VOC’s from 0 to 5,000 ppm, depending on gas selected, with a 1 ppm resolution.

            The sensor has a library with 20 stored gases and 3 available user programmable entries.  The X-am 7000 has two available high-power ports for the installation of the PID, IR or Cat Ex Sensors.  The PID can be coupled with one IR or Catalytic Combustible Sensor and up to three electrochemical Draeger Sensors to greatly expand the applications of the monitor.